This Bar Cutter is manufactured from heat-treated high-strength machined steel, easy to rotate for prolonged use and longer service life.

Bar Cutter has a high-pressure motion for the rebar to be cut.

In a job, there are certainly many results of our work that are almost imperfect. This means that everything we do will have flaws and imperfections.

Machinery is one of the right solutions to help you get the job done, especially in the construction field. Why do construction jobs pose more risks in the field than others? Yupz, of course we know that construction work will always involve heavy equipment and large machines. As operators, we must realize how important our safety is.

There are many types of machinery and equipment that are daily operational in the workplace environment. One of the machines used for step cutting iron and steel to make building frames is the Bar Cutter.

In the process of cutting iron or steel meters, you can choose to use a manual bar cutter or an electric bar cutter. The selection of the type of bar cutter for workers must be adjusted to the needs of the operator, both understanding and experience using the machine.

When cutting iron and steel, there is always the possibility that the cut is not perfect. It is usually located at the cutting edge, which is feared to shoot out, especially if the length is less than 30 minutes. Exceeding the specified material specifications can increase the risk of tool damage. Do not attempt to cut rebar.

Therefore, you must be able to measure the material to be cut to suit your wishes. How the result can be harder, thicker or thinner than what has been determined in advance.

The use of a cutting machine or bar cutter must be tailored to the cutting requirements. Power source selection and optimization machine parameters is a very important design consideration. Therefore, a laboratory setup is required to quantify the mechanical forces involved and the influence of measurement parameters.

Before using the bar cutter machine, you need to read the operating manual. Because, by reading and understanding this manual, you will know how to operate an electric bar cutter. In addition, if the tool is used for work, then you can know the technique of maintaining the machine properly.

Following the operating requirements in the operating manual will keep your machine in the best operating condition so as to extend its service life.

This is done because there are many factors that cause failure in the iron and steel cutting process, namely when the iron and steel are in a high temperature situation, causing the stress to decrease.